SMART Board SB480iv2 - Home

APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
46 smarttech.com/kb/170782
To use the management web page
1. Start your Internet browser.
2. Type the IP address in the address box, and then press Enter.
The SMARTV30 Projector Settings window appears.
3. Select the menu options in the left pane to access the settings on each page.
4. Modify settings using your computer’s mouse and keyboard, and then click Submit or another
action button next to each setting you change.
Home
The Home menu page displays basic projector information and enables you to select the
on-screen display language.
NOTE
You can view basic projector information but you’re unable to change it (with the exception of
the on-screen display language) from the Projector Information menu page.
Submenu setting Description
Model Name
Displays the model name.
Projector Name
Displays the projector name. Set in LAN Setting on the next page.
Location
Displays the projector’s location. Set it in LAN Setting on the next
page.
Contact Displays contact information. Set it in LAN Setting on the next page.
Status Displays the projector’s status.
Lamp Hours Displays how many hours the lamp has been on
Operation hours Displays how many hours the projector has been on
IPAddress Displays the IPaddress. Can be set it in LAN Setting on page1.
MACAddress Displays the MACAddress.
Admin Password Displays the administrator password. Set it in Security Setting on
page49.
Language Sets the language from English, German, Spanish, French, Italian,
Dutch, Portuguese, Japanese, Simplified
Projector Information Displays current projector information