APPENDIX D
INTEGRATING OTHER DEVICES
64 smarttech.com/kb/170782
Video system signal compatibility
The following tables list the projector’s video system signal compatibility delivered over HDMI
video connectors, which you can adjust by using the aspect ratio commands described in
Adjusting projector settings
on page55.
Video mode Aspect ratio Vertical frequency (Hz)
720p 16:9 59.94
720p 16:9 50
1080i 16:9 50
1080p 16:9 50.94
1080p 16:9 50
576i 5:4 50
480i 4:3 50.94
Connecting peripheral sources and outputs
Follow these instructions if you have a peripheral device to connect to your interactive whiteboard
system, such as a DVD/Blu-ray player.
NOTE
Measure the distance between the projector and the peripheral device you want to connect.
Make sure each cable is long enough, has plenty of slack and can be placed safely in your room
without presenting a trip hazard.
To Next Page
Loading...
