SMART Board MX Series Installation And Maintenance Guide

Chapter 4 Maintaining the display
smarttech.com/kb/171555 55
In most situations, you can put the display into Sleep or Standby when not using it following the
instructions in the SMARTBoard MX and MX Pro series interactive displays user guide
(smarttech.com/kb/171554).
In some situations, such as when you transport the display or clean its screen, you need to turn the
display off. You can turn it back on after.
You can also reset the display.
Turning off, turning on, and resetting SMART Board MX (V3, V2 and V2-C)
series displays
To turn the display off
1.
Press the Power button on the front control panel or the remote control for five seconds.
A slider appears on the screen.
2. Move the slider to the right.
3. Flick the switch beside the AC power inlet to the OFF(O) position.
Note
Wait at least 30 seconds before turning the display back on.
To turn the display back on
Note
Touch is not available right after waking up the display or turning it on. Wait a few seconds and then
the display will respond to touch.
1. Flick the switch beside the AC power inlet to the ON(I) position.
2.
Press the Power button on the front control panel or the remote control.
To reset the display
Press and hold the Power button on the front control panel or the remote control for 10 seconds.
The display resets.

SMART Board MX Series Specifications

General

Screen Sizes	65", 75", 86"
Touch Points	20
Aspect Ratio	16:9
Response Time	8 ms
Viewing Angle	178°
Integrated Speakers	Yes
Internal Storage	16 GB
VESA Mount Compatibility	Yes
Warranty	3 years
Display Type	LCD
Brightness	350 cd/m²
Inputs	HDMI, USB, VGA
Operating System Compatibility	Windows, macOS, Chrome OS
Operating System	Android
Processor	Quad-Core
Dimensions	Varies by size
Touch Technology	Infrared
Weight	Varies by size: 65" - 45.6 kg, 75" - 62 kg, 86" - 78 kg