SMART Board MX Series Installation And Maintenance Guide

Appendix D Managing SMARTBoard MX series displays using RS-232
smarttech.com/kb/171555 110
Power states
The display has the following power states:
Power state Description
ON The display is in normal operating mode.
READY The screen is off, but the display is ready to turn on when:
l
A user presses the Power button on the front control panel.
l
A user presses the Power button on the remote control.
l
You send the setpowerstate=on command.
Tip
If the setpowerstate command returns an “invalid command” message,
add spaces around the operator symbol (=).
SOFTOFF (low
power state)
The screen is in a low power state (soft off) and won’t respond to RS-232
commands. Disable Power saving mode to prevent the display from entering a
low power state. See Power saving mode on page91.
The display turns on when:
l
A user presses the Power button on the front control panel.
l
A user presses the Power button on the remote control.
UPDATEON The display is updating firmware. Do not turn off the display.
UPDATEREADY The display is updating firmware while the screen is off. Do not turn off the
display.
With the exception of getpowerstate and setpowerstate, commands are available only when the
display is in ON power state.

SMART Board MX Series Specifications

General

Screen Sizes	65", 75", 86"
Touch Points	20
Aspect Ratio	16:9
Response Time	8 ms
Viewing Angle	178°
Integrated Speakers	Yes
Internal Storage	16 GB
VESA Mount Compatibility	Yes
Warranty	3 years
Display Type	LCD
Brightness	350 cd/m²
Inputs	HDMI, USB, VGA
Operating System Compatibility	Windows, macOS, Chrome OS
Operating System	Android
Processor	Quad-Core
Dimensions	Varies by size
Touch Technology	Infrared
Weight	Varies by size: 65" - 45.6 kg, 75" - 62 kg, 86" - 78 kg