SMART Board MX Series - Recovery; About

Appendix B Adjusting display settings
smarttech.com/kb/171555 92
Recovery
Option Values Function Notes
Restore user settings [N/A] Resets any options the user may
have changed
[N/A]
Restore factory settings [N/A] Resets all options to their default
values
Only administrators should reset the
display.
About
Option Values Function Notes
Name [N/A] Select a name for your display This name is different from the
display name set in the iQ system
software.
RAM [N/A] Shows how much RAMis installed in
the display
[N/A]
Local storage [N/A] Shows how much storage memory is
available and how much is currently
in use
[N/A]
Resolution [N/A] Shows the display’s current screen
resolution
[N/A]
Android [N/A] Shows the current version of the
Android operating system on the
display
[N/A]
MX system version [N/A] Shows the current version of the
display’s scalar firmware
[N/A]
Touch kit [N/A] Shows the current version of the
touch system firmware
[N/A]
HDMI-out [N/A] Shows the current version of the
HDMI-out system firmware
[N/A]
MAC address [N/A] Shows the network’s MACaddress [N/A]
Serial number [N/A] Shows the display’s serial number [N/A]
License [N/A] Shows third-party component
licenses
[N/A]
User agreement [N/A] Shows the SMARTEULA [N/A]