SMART Board MX Series - Page 78

Appendix A Adjusting iQ settings
smarttech.com/kb/171555 78
Option Values Function Notes User or system
setting
Go to energy saving
mode after
Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Sets the number of minutes of
inactivity before the display enters
an energy saving mode.
The default is 60
minutes.
This option is not
available for
SMART Board
MX series
displays.
System
Standby (Shutdown) [N/A] If selected, the display will turn off all
running components to achieve
maximum energy savings but wakes
up slower.
This option is
more energy
efficient.
This option is the
default for
displays in the
EU.
For information
about the
display’s energy
saving modes,
see About
energy saving
modes on
page33.
This option is not
available for
SMART Board
MX series
displays.
System
Networked Standby
(Sleep)
[N/A] If selected, the display wakes up
faster and can be turned on up by a
Wake on LAN command from the
network.
This option is less
energy efficient.
This option is the
default for
displays not in
the EU.
For information
about the
display’s energy
saving modes,
see About
energy saving
modes on
page33.
This option is not
available for
SMART Board
MX series
displays.
System
External Inputs