SMART GX Series - Page 76

Appendix 7 Adjusting display settings
smarttech.com/kb/171861 76
Option Values Function Notes
Input settings
Rename/enable inputs [N/A] Enables renaming and disabling
individual inputs on the display.
[N/A]
Enable input renaming On
Off
Enables renaming of individual
inputs on the display.
Note
An input name changes from
gray to green when it's editable.
[N/A]
PC On
Off
Enables or disables the video input in
the display's OPS expansion slot.
This option is available when an OPS
PC module is installed in the display’s
accessory slot.
Android On
Off
Enables or disables the in-built
Android system software.
[N/A]
HDMI1 On
Off
Enables or disables the HDMI 1 video
input on the side connector panel.
[N/A]
HDMI2 On
Off
Enables or disables the HDMI 2
video input on the side connector
panel.
[N/A]
HDMI3 On
Off
Enables or disables the HDMI 3
video input on the front connector
panel.
[N/A]
Type-C1 On
Off
Enables or disables the USB Type-C
input on the side connector panel.
[N/A]
Type-C2 On
Off
Enables or disables the USB Type-C
video input on the front connector
panel.
[N/A]
DP On
Off
Enables or disables the Display Port
video input on the bottom connector
panel.
[N/A]
VGA On
Off
Enables or disables the analog VGA
input on the bottom connector
panel.
[N/A]
CEC On
Off
Enables or disables Consumer
Electronic Control functions for
HDMI video inputs.
HDMI-CEC (Consumer Electronics
Control) is a function of the HDMI
standard that allows connected
devices to talk with each other.
Enabling this will allow you to control
the display's power and audio
volume by using the remote control
of a CEC capable device connected
to the display via HDMI (such as a
DVD player or media device)
Wake on active source On
Off
Enables the display to be turned on
by connecting an active video signal
to the display.
[N/A]