SMART GX Series - Page 87

Appendix 8 Adjusting Input settings
smarttech.com/kb/171861 87
Option Values Function Notes
Treble -5 to 5 Sets the treble level. This setting is only adjustable when
Custom audio mode is enabled (see
Audio modes below).
Balance -50 to 50 Sets the L/R balance of the display’s
built-in speakers.
[N/A]
Audio modes
Standard On
Off
This is the default audio mode [N/A]
Meeting On
Off
An audio mode optimized for
meeting rooms, with slightly reduced
bass.
[N/A]
Class On
Off
An audio mode optimized for
classrooms, with slightly reduced
bass and slightly increased treble.
[N/A]
Custom On
Off
An audio mode that allows full user
control of bass and treble
adjustments.
[N/A]
Mute On
Off
Mutes the display’s audio system. [N/A]
Screen
Pixel shift On
Off
If enabled, the display's image will
move up and down momentarily to
reduce the risk of image burn-in. To
set timing options, see Pixel Shift in
the System on page79 section of
display settings).
[N/A]
Eye Care On
Off
Reduces the amount of brightness
and blue light to help reduce
eyestrain.
[N/A]
AutoLight On
Off
Detects the ambient light in the room
and automatically adjusts the screen
brightness.
[N/A]
SaveEnergy On
Off
Reduces the screen brightness of the
display to save power.
[N/A]
Image scaling
Note
The following settings are only available when DP or VGA inputs are selected.
4:3 On
Off
Sets the screen image’s aspect ratio
to 4:3
[N/A]
16:9 On
Off
Sets the screen image’s aspect ratio
to 16:9
[N/A]