SMART GX Series - Page 88

Appendix 8 Adjusting Input settings
smarttech.com/kb/171861 88
Option Values Function Notes
PTP On
Off
This setting may help if the 16:9
setting causes the screen image’s
edges to be clipped.
[N/A]
Auto On
Off
Enables the display to automatically
choose the optimal image scaling
for the source video signal.
This is the default setting.
This is the recommended setting for
image scaling.
Display
Note
The following settings are applicable to all inputs.
Brightness 1 to 100 Sets the overall brightness of the
image.
[N/A]
Contrast 1 to 100 Sets the difference in brightness
between the lightest and darkest
parts of the image.
[N/A]
Hue 1 to 100 Sets the hue (color) of the image. This setting is available only when
Custom display mode is enabled
and is not available for all inputs.
Sharpness 1 to 100 Sets the sharpness of the image. This setting is available only when
Custom display mode is enabled
and is not available for all inputs.
Display modes
Standard On
Off
The default display mode, for
optimal performance.
[N/A]
Bright On
Off
A brighter image mode that may use
more power.
Different shades of light gray may be
harder to see in this mode.
Soft On
Off
A softer image mode with slightly
reduced contrast.
[N/A]
Custom On
Off
An image mode that allows users to
customize the image brightness,
contrast, hue, and sharpness.
[N/A]
Color modes
Standard On
Off
The default color mode. [N/A]
Cold On
Off
Raises the screen image's color
temperature.
[N/A]
Warm On
Off
Lowers the screen image's color
temperature.
[N/A]
••• icon (additional
settings)
[N/A] Manually adjust the red, green, and
blue color channels individually. You
can also reset the white balance to
its default setting.
[N/A]