3. First Use
3.1 Charging
Warning: please use the supplied power adapter for charging, we do not responsible for any
damage or financial loss caused by charging with other chargers not specified by us.
Follow the steps below to charge the P13 tablet:
1) Plug one end of the power adapter into the DC-IN charging jack of the host and connect the
other end to a power socket.
2) When the power indicator light displays red and the battery logo on the screen of the host
displays , which indicates that charging is in progress.
3) When the power indicator light displays green and the battery level display is 100%, which
indicates that charging is complete.
Notes:
If the device has not been used for a long time or the device battery is exhausted, it may not be
able to turn on normally when charging, which is a normal phenomenon. Please charge the device
for a period of time before trying to turn it on.
As the battery is easily consumable, the standby time of the device will be shortened after a long
time of use.
3.2 Power On/Off
3.2.1 Power On
Press and hold the power button for about 3 seconds, the system will start.
When the device is turned on for the first time, the boot process will start, follow the prompts to
complete the boot process to enter the system desktop and will not enter the boot process again.
Notes: The boot process will be triggered when the device is restored after factory data reset.
3.2.2 Power Off/Restart
Press and hold the power button on the device for 1-2 seconds under the open screen state, the
system will pop up the " Power off/ Restart/ Screenshot" option menu, click Power off to turn off
the device or click Restart to restart the device.
3.3 Gesture Operation
3.3.1 Navigation
Gesture navigation includes the following operations:
Switch Desktop: In full-screen state, swipe left and right on the screen to switch pages after
To Next Page
Loading...