7.28 Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof
memory function, temperature threshold outside the car etc.
7.29 Suspension Calibration
This function enables you to adjust the height of the body.
It needs to be performed in the following cases:
1) When replacing the body height sensor, or control module in the air suspension system.
2) When the vehicle height is incorrect.
7.30 Language Change
This function is used to change the system language of the vehicle central control panel.
7.31 Intelligent Cruise Control System Diagnosis
It is used for matching after the intelligent cruise control module is replaced or repaired.
7.32 AC System Relearn/Initialization
AC system relearn/ initialization must be performed when the vehicle AC ECU or actuator is
replaced or the ECU memory is lost.
7.33 Seats Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
7.34 AFS (Adaptive Front-lighting System) Reset
This function can be used to initialize the adaptive headlamp system. The adaptive headlamp
system can decide whether to turn on the headlamp automatically according to the environmental
light intensity, and monitor the vehicle's speed and body posture, and adjust the lighting angle of
the headlamp timely.
7.35 EGR Learning
This function is used for learning after EGR (Exhaust Gas Recirculation) valve cleaning or
replacement.
7.36 ABS Exhaust
When the ABS system contains air, it is necessary to exhaust the brake system through the ABS
exhaust function, thus restoring the sensitivity of the ABS system brakes. In addition, it is
necessary to use the ABS exhaust function, to exhaust the ABS system in the case of replacing the
To Next Page
Loading...