Remote Diagnose
The function module is used to remotely assist
users in diagnostic operations on the vehicle.
Super Remote
The module is used to assist service technicians
in issuing super remote diagnosis requests.
3.8 Communication Settings
The main communication methods between the tablet and the VCI connector are Wi-Fi
communication, USB wired communication and Bluetooth communication.
3.8.1 Wi-Fi Communication
To establish a connection between the tablet and VCI connector, users need to register and
activate the VCI connector on the tablet. Once the activation is completed, the tablet and VCI
connector will automatically match and establish a Wi-Fi connection.
3.8.2 USB Communication
When connecting the tablet and VCI connector via USB cable, the system will automatically switch
to USB communication mode.
3.8.3 Bluetooth Communication
Click the [ Settings] button in the upper left corner of the "Diagnose" interface, and then click the
Firmware Fix menu option continuously until the "VCI Management" pops up in the Settings
interface, and then select "Use Bluetooth Communication Mode" to open the Bluetooth
communication. A pop-up window will be displayed to remind the user to connect the Bluetooth.
Notes: In order to make the data transmission more stable during the communication process,
it is recommended to use Wi-Fi communication or USB wired communication.
To Next Page
Loading...