SMC Networks EX245-FPS1 - Under-Voltage Detection

- 23 -
No.EX##-OMY0004
5.2. Under-voltage detection
5.2.1. LED indicator
US1 indicator shows the status of the supply for the logic/sensors. US2 indicator shows the status of the
supply (US2) for the valves/loads.
The status of the load supply is reflected in the diagnostic data.
5.2.2. Diagnostic data
“General diagnostics 1” byte shows under-voltage detection.
“US1 Diagnostics” bit shows under-voltage detection of the supply for the logic/sensors.
“US2 Diagnostics” bit shows under-voltage detection of the supply for the valves/loads.