HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
HRSH Series 5.23 Communication Function
5-89
58. Select a function for the contact output signal 3 with [▲] key or [▼] key, and press [SEL]
key to enter.
Table 5.23-30 Function setting for the contact output signal 3
Operation status signal output
Remote status signal output
Ready completion (TEMP READY) signal output
Operation stop alarm signal output
Operation continuation alarm signal output
Alarm status signal output
Selected alarm status signal output
Operation start timer setting status signal output
Operation stop timer setting status signal output
Operation restoration from power failure setting status signal
output
Anti-freezing setting status signal output
Pass through signal output of the contact input signal 1
Pass through signal output of the contact input signal 2
Warming up function setting status signal output
Anti-snow coverage function setting status signal output
Setting/Checking: Operation of the contact output signal 3
59. Press the [SEL] key once.
Setting screen of the contact output signal 3 operation is displayed on the digital display.
60. Set the operation type of the contact output signal 3 with [▲] key or [▼] key, and press
[SEL] key to enter.
Table 5.23-31 Operation setting for the contact output signal 3
To Next Page
Loading...
Need help?
General
