SMC Networks HRSH150-A*-40 Series - 5.15 Data Reset Function

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
5.15 Data Reset Function HRSH Series
5-34
5.15 Data Reset Function
5.15.1 Data reset function
Resets the values set by user to the default values. Note that the
accumulated operating time will not be reset.
5.15.2 How to operate reset function
The table below shows the set item for data reset and the default setting.
Table 5.15-1 Set item for data reset
Display
Item
Contents
Default
Data reset
Resets all the data.
(Accumulated operation time will not be
reset.)
NO
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display.
Data reset
2. Press the [SEL] key 13 times.
Data reset screen appears on the digital display.
3. Select with [▲] key or [▼] key, and press [SEL] key to enter. Select
and press [SEL] key to enter. This resets all the data to the default, and the
display returns to the main display.
Table 5.15-2 Data reset
Set value
Explanation
Default
No data reset.
✓
Resets all the data.
PV
SV
PV
SV
PV
SV
PV
SV
Press and
hold [MENU]
key.
Press and
hold [MENU]
key.
This function resets all the set values.
Use caution when operating this function.
It is recommended to record the set data before resetting.