SMC Networks HRSH150-A*-40 Series - Key-Lock Setting; Checking

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
5.6 Key-lock HRSH Series
5-14
5.6.2 Key-lock setting / checking
The table below explains the setting items of the key-lock function and the
initial values.
Table 5.6-1 Set items for key-lock
Display
Item
Contents
Default
Key-lock
Sets the key-lock function ON.
When the key-lock function is set ON, no other settings
are available.
OFF
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display
Setting/checking: Key-lock function
2. Select “ON” with [▲] key or [▼] key, and enter with the “SEL” key.
Table 5.6-2 Setting of the key-lock function
Set value
Explanation
Default
Key-lock function OFF
✓
Key-lock function ON
3. Press the [MENU] key once.
Returns to the main display (which shows the circulating fluid temperature).
PV
SV
PV
SV
PV
SV
PV
SV
Press and
hold [MENU]
key
［MENU］
Press and
hold
Press and
hold [MENU]
key