SMC Networks HRSH150-A*-40 Series - Setting;Checking of the Operation Restoration Function

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
5.10 Operation Restoration after Power Failure HRSH Series
5-28
5.10.2 Setting/checking of the operation restoration function
The table below shows the setting items of the operation restoration after
power failure function and the default setting.
Table 5.10-1 Set item for operation restoration after power failure function
Display
Item
Contents
Default
Operation
restoration after
power failure
Sets operation restoration
after power failure function.
OFF
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display.
Setting/Checking: Operation restoration after power failure function
2. Press the [SEL] key 8 times.
Setting screen of operation restoration after power failure function appears on the digital
display.
3. Select operation restoration function after power failure with [▲] key or [▼] key, and
press [SEL] key to enter.
Table 5.10-2 Setting of “Operation restoration after power failure function”
Set value
Explanation
Initial value
(Default setting)
Operation restoration after power failure function
OFF
✓
Operation restoration after power failure ON
4. Press the [MENU] key once.
Returns to the main display (which shows the circulating fluid temperature).
PV
SV
PV
SV
PV
SV
PV
SV
PV
SV
Press and
hold [MENU]
key
Press and
hold [MENU]
key