HRX-OM-Q026
Chapter 6 Alarm Notification and Troubleshooting
6.1 Alarm Notification HRSH Series
6-2
● When multiple alarms are generated, the alarm codes are displayed
one by one by pressing the [SEL] key
Alarm with the number ”1” in the SV window on the digital display is the
latest alarm. The alarm with the largest number is the alarm that was
generated first.
When the alarms are generated in the order of
AL16, AL03, and AL02:
The alarm code displayed on the operation panel
is AL02. AL03 and AL16 are displayed by
pressing the [SEL] key.
When AL16 being is displayed, the SV window
displays "3". In this example, AL16 has the
largest number. This means AL16 is the alarm
that was generated first.
PV
SV
PV
SV
PV
SV
SEL
キー
SEL
キー
SEL
キー
To Next Page
Loading...
Need help?
General
