C
HAPTER
5
| Monitoring the Switch
Showing IGMP Snooping Information
– 240 –
◆ Port Members – The ports assigned to the listed VLAN which
propagate a specific multicast service.
WEB INTERFACE
To display the port members of each service group, click Monitor, IGMP
Snooping, Group Information.
Figure 117: IGMP Snooping Group Information
SHOWING IPV4 SSM
INFORMATION
Use the IGMP SSM Information page to display IGMP Source-Specific
Information including group, filtering mode (include or exclude), source
address, and type (allow or deny).
PATH
Monitor, IPMC, IGMP Snooping, IPv4 SSM Information
PARAMETERS
These parameters are displayed:
◆ VLAN ID – VLAN Identifier.
◆ Group – The IP address of a multicast group detected on this interface.
◆ Port No – Port identifier.
◆ Mode – The filtering mode maintained per VLAN ID, port number, and
Group Address. It can be either Include or Exclude.
◆ Source Address – IP Address of the source. Currently, the system
limits the total number of IP source addresses for filtering to be 128.
Different source addresses belong to the same group are treated as
single entry.
◆ Type – Indicates the Type. It can be either Allow or Deny.
To Next Page
Loading...
Need help?
General
