Snom 821 - Calling emergency numbers; Call completion

45
snom 821 User Manual Using the Phone
the programmable virtual function keys 1-15: See the chapter "Programming the function keys" on
page 61and "Example 3, Speed dialing" on page 64.
• Speed dial number on speed dial list
1. Enter the speed dial number (0-30) or character (#, *) assigned to the phone number you wish
to dial.
2. Press
to dial.
• Speed dial number mapped onto one of the keys P1 - P4: Press the respective key to dial the
number.
• Speed dial number mapped onto virtual function keys P5 - P12. (Note: This method will also work
for P1 - P4; the programmable keys P1 - P4 are both hard keys and virtual keys.)
1. Press key P1 for two seconds. The virtual function key screen opens.
2. Press the assigned speed dial character (the numbers 0-9, the asterisk *, or the pound key #)
on the alphanumeric keypad.
Calling emergency numbers
Numbers specified as emergency numbers can be dialled even when the keyboard is locked! See
"Emergency numbers" on page 73 on how to set emergency numbers. Several numbers (911, 112, 110,
999) have been preconfigured.
• On an unlocked keyboard: Enter the number and press
to dial.
• On a locked keyboard: Enter the number. The phone dials the number as soon as you have
entered all the digits.
Call completion
Note: This function depends on whether it is available in your network or not. On snom
phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available
again. The factory default setting is "off".
Changing the setting to enable call completion: See "Call completion" on page 75.
When call completion is enabled,
CC
will appear in the function key line whenever you dial. Press
CC
to activate call completion for this call.
• Press to turn off call completion for this call.
• Press
if you wish to dial another number while waiting for call completion. You can now dial