Snom 821 - Making and changing the settings on the phone; Turning on call forwarding

56
snom 821 User Manual Using the Phone
Forward when Busy: Forwarding calls ringing while phone is busy to the number of the phone,
extension, or mailbox specified as this function’s target.
Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds
specified in the setting "Call forwarding time". If the call is not accepted by the end of this time period,
it is forwarded to the number of the phone, extension, or mailbox specified as this function’s target.
Making and changing the settings on the phone
Forward all Forward when busy Forward after timeout
Press
Press
2
AB C
2 Call Features
2
AB C
2 Call Features
2
AB C
2 Call Features
Press
1
1 Call Forwarding
1
1 Call Forwarding
1
1 Call Forwarding
Press
1
1 Forward All
2
AB C
2 Forward when Busy
3
DEF
3 Forward after Timeout
Press
2
AB C
2 Target when forwarding
2
AB C
2 Target when forwarding
2
AB C
2 Target when forwarding
Type phone number phone number phone number
Press
3
DEF
3 Call Forwarding time
Type number of seconds
Press
Press
for two seconds to return to the idle screen
Turning on call forwarding
If the phone number has not been set or needs to be changed, follow the instructions in the table
"Making".
Forward all Forward when busy Forward after timeout
Press
Press
2
AB C
2 Call Features
2
AB C
2 Call Features
2
AB C
2 Call Features
Press
1
1 Call Forwarding
1
1 Call Forwarding
1
1 Call Forwarding
Press
1
1 Forward All
2
AB C
2 Forward when Busy
3
DEF
3 Forward after Timeout
Press
1
1 Enable forwarding [No]
1
1 Enable forwarding [No]
1
1 Enable forwarding [No]
Menu item changes to: 1 Enable forwarding [Yes]. Call forwarding is now active.
Press
for two seconds to return to the idle screen
The display will indicate that call forwarding is turned on and which number calls will be forwarded to.
Note: Forwarding when busy and after timeout are indicated in the status line, which can
display only one message at a time. When both are active at the same time, only "Forward
when busy" will be displayed. If there are other status messages with a higher priority
than "Forward when Busy" (e.g., firmware update available, reboot required, waiting for
call completion, etc.), they will take precedence over the call forwarding indication.