Lit. No. 30118, Rev. 00 June 15, 2020
4
This guide has been prepared to assist the
trained mechanic in the service of SnowEx
®
RDV™ V-plows. It also provides safety information
and recommendations. We urge all mechanics to
read the safety statements and instructions in this
guide carefully before attempting to service the
snowplow equipment covered by this guide.
Service of your SnowEx snowplow equipment is
best performed by your local SnowEx products
dealer. They know your snowplow best and are
interested in your complete satisfaction.
INTRODUCTION
RECOMMENDED TOOLS
• Long/slender needle-nose pliers
• Flat screwdriver
• 12V test light
• Torque wrench
• Hex key set, including 3/8"
• Combination standard wrench set
• 1/4" drive ratchet set with 6" extension
• 3/8" drive ratchet set
• Deep socket: 7/8"
• Digital volt/ohmmeter
• Ammeter
• Pressure test kit
• Flashlight
• Pick set
• Hammer
• Pencil magnet
• 5A mini fuses
• Vacuum pump with 3/8" NPT barbed fi tting
• 3/8" NPT plug
AVAILABLE SERVICE ITEMS
• Motor Bearing Sleeve Repair Kit: PN 52251
(Requires 3/8"-24 x 4" cap screw, not
included.)
• Pressure Test Kit: PN 56686
(Requires adapter fi tting, not included.)
• Spring Replacement Tool: PN 20043-1
• Diagnostic Harness Kit: PN 29290-2
• Pump Shaft Seal Repair Kit: PN 28856
(Requires 1/4"-28 x 4-1/2" cap screw, not
included.)
To Next Page
Loading...