socomec ATyS t - 11. PREVENTIVE MAINTENANCE

61
EN
ATYSt - 541995C - SOCOMEC
11. PREVENTIVE MAINTENANCE
It is recommended to verify the tightening torque of all connections and to operate the product in a full operating cycle (I – 0 –
II – 0 – I: Auto and Manual) at least once a year.
Note: Maintenance should be planned carefully and carried out by qualied and authorised personnel. Consideration of the
critical level and application where the product is installed should form an essential and integral part of the maintenance
plan. Good engineering practice is imperative whilst all necessary precautions must be taken to ensure that the intervention
(whether directly or indirectly) remains safe in all aspects.