SmartSMS User Manual Soft dB inc.
User Manual p. 10
2.1.2 SmartSMS CTL units
SmartSMS CTL units are controller units with differential (balanced) line level outputs and must be
used with external power amplifiers. For proper set-up and optimum performance, the external
amplifiers must have differential (balanced) inputs. The CTL unit is available with 2 or 8 outputs
channels.
Figure 3: Front Panel of SMS-CTL units
A: Reference Microphone Input
B: USB Connector
C: Status Light
D: Hardware Volume Control
Figure 4: Rear Panel of SMS-CTL Units
A: Output Signal Connectors
B: Auxiliary Inputs
C: Fuse (5A Slow-Blow)
D: 24 Volt Electrical Input
E: Active Control Inputs
F: On/Off Switch
To Next Page
Loading...