SmartSMS User Manual Soft dB inc.
User Manual p. 46
Figure 38 : Dialog box to adjust the global volume
The hardware volume multiplier allows the range for each step of the Volume control knob in the
front panel of the SmartSMS unit to be set. Values are x0.5, x1, x1.5 and Bypass (Bypass means
that the knob has no effect on the level of the masking sound). X1 means that the rotary switch will
increase or decrease the sound masking level by 1 dB for each click.
6.4.6 Active Control
The Active Control button is used to adjust the various Active control parameters. See section 0 for
more information about the Active System.
This small button is used to examine the specified input of the active system with the spectrum
analyzer. See section 6.5.2 for more information about the spectrum analyzer.
To Next Page
Loading...