SmartSMS User Manual Soft dB inc.
User Manual p. 15
STEP 2: Power the SmartSMS unit
Connect the power supply to the SmartSMS unit using the “INPUT 24VDC” port at the back of
the unit. Push the power button. The Power LED on the front of the SmartSMS unit should turn
yellow.
STEP 3: Connection of the SmartSMS unit to the PC
Connect the SmartSMS unit to a computer using a USB cable.
Windows will then ask for the Signal Ranger Mk2 Drivers.
These drivers are located in the C:\Program Files\SMS_Software_VersionII\
Driver_USB_smartSMS_II directory.
Follow the steps in Windows to select the appropriate directory and continue the installation.
! Windows may display a warning message indicating that the driver is not certified. Ignore it
and continue the installation.
See Appendix A for more information and screenshots
The Power LED on the front of the SmartSMS unit should turn green.
To Next Page
Loading...