EasyManuals Logo

SolaX Power X1-EVC Series User Manual

SolaX Power X1-EVC Series
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
11
3 Transportation and Storage
If the EV-Charger is not put into use immediately, the transportation and storage
requirements needs to be met:
Transportation
Observe the caution signs on the packaging of EV-Charger before transportation.
Pay attention to the weight of EV-Charger. Be cautious to avoid injury when
carrying the EV-Charger.
Wear protective gloves when carrying the equipment by hand to prevent injuries.
When lifting up the EV-Charger, hold the bottom position of the EV-Charger.
Keep it horizontal in case of falling down due to tilt.
Figure 3-1 Handle position of carton
Storage
The EV-Charger must be stored indoors.
Do not remove the original packaging material and check the outer packaging
material regularly.
The storage temperature should be between -30°C
and +60°C. The humidity
should be between 5% and 95%.
Stack the EV-Charger in accordance with the caution signs on the carton to
prevent their falling down and device damage. Do not place it upside down.
If the EV-Charger has been stored for more than 2 years, it must be checked and
tested by professionals before use.

Table of Contents

Other manuals for SolaX Power X1-EVC Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SolaX Power X1-EVC Series and is the answer not in the manual?

SolaX Power X1-EVC Series Specifications

General IconGeneral
BrandSolaX Power
ModelX1-EVC Series
CategoryBattery Charger
LanguageEnglish

Related product manuals