14
Product Overview
Black Start
The equipment can provide Black Start capacity, meaning that our energy storage inverter
and battery can continue to run even if the power grid and photovoltaic panel are out of
service. The startup procedure for Black Start is as follows:
• First stage: in case of pressing and holding the POWER button for less than 15
seconds, the status light will come on solid yellow light in the first 11 seconds and
then turn to solid green light in the last 4 seconds, and the SOC power indicators
will come on solid blue light based on the actual remaining capacity.
• Second stage: after pressing and holding the POWER button for more than 15
seconds, the status light will flash yellow light every 1 second, and all the SOC
power indicators will remain on solid blue light based on the actual remaining
capacity.
• Finally, release the POWER button.
To Next Page
Loading...
Need help?
General
