Solcon MPS 3000 - Menu Navigation Top; Parameter Settings; Data Review; Test; Maintenance

MENU NAVIGATION TOP
Page 22 of 67
MENU NAVIGATION TOP
Parameter Settings
For parameter setting there are five menu options available.
By pressing Set Page key the LCD presents the following menus:
System Parameter
*** Settings ***
Overload
*** Settings ***
Analog I/O
*** Settings ***
Voltage
*** Settings ***
Power
*** Settings ***
Tripping / Alarm
*** Options ***
Current
*** Settings ***
Temperature
*** Settings ***
Communication
*** Settings ***
Data Review
By pressing Data Page key the LCD displays the following headers:
Measured Data
- **** -
Logical Inputs -
*Contact Status*
Fault Data
- **** -
Calculated Data
- **** -
Statistical Data
- **** -
Test / Maintenance
By pressing Set Page key and ▲key simultaneously, the LCD will display:
Test/Maintenance
*** Options ***