Solid State Logic SSL UF1 User Manual

LUNA Tutorial
104
SSL UF1 User Guide
Automation
To select the automation mode for the DAW track shown on the UF1 fader, you will first need to press the SEL key. Next, engage the
SHIFT key to change the secondary transport keys to be automation keys. Finally, press the secondary transport key that matches
your desired automation mode.
WRITE automation mode is not applicable to LUNA and as such, the key is disabled.
STEP 1: Use the SEL key to
select the track.
STEP 3: press to select the automation mode you wish to set the track to.
STEP 2: Engage the SHIFT KEY to re-purpose the secondary transport keys to be
automation keys.

Solid State Logic SSL UF1 Specifications

General

Brand	Solid State Logic
Model	SSL UF1
Category	DJ Equipment
Language	English