Name: Solid State Logic SSL UF1
Brand: Solid State Logic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Live Tutorial

SSL UF1 User Guide

Ableton Live with UF1 - Tutorial

The following tutorial guides you through conﬁguring and using the default Ableton Live proﬁle on LAYER 1 of UF1. If you wish

to conﬁgure Live on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is

conﬁgured for the correct SSL V-MIDI ports..

SSL 360° Setup

1. Open the SSL 360° application on your Mac or Windows computer. Go to the HOME page and check that your UF1 has been

detected by SSL 360°.

2. Go to the UF1 page and set Layer 1 to Ableton Live using the drop-down list. If Live is not available from the drop-down list

it is because you have not conﬁgured it as DAW 1 on the CONTROL SETUP page - ensure you do this ﬁrst.

Live Setup

3. Open Live. Go to Preferences > Link MIDI...

4. From the Control Surface drop-down list select MackieControl. Set the Input to SSL V-MIDI Port 1 Source and set Output

to SSL V-MIDI Port 1 Destination.

STEP 2 : Select the default Ableton

Live DAW prole from the UF1 page.

STEP 3 : Go the Preferences menu

and click on the Link MIDI tab.

STEP 4 : Add a MackieControl and

congure for SSL V-MIDI Port 1 on

Input and Output

STEP 1 : Open SSL 360° application.

Check your UF1 has been detected

Questions and Answers:

Need help?

Do you have a question about the Solid State Logic SSL UF1 and is the answer not in the manual?

Solid State Logic SSL UF1 Specifications

General