Product Overview & Features
21
SSL UF1 User Guide
Switching the control layer from UF1 (Layer Set Up)
On UF1, you can switch between up to 3 different DAWs Layers that you have configured (or between DAWs and the SSL 360°
Plug-in Mixer). To do this, hold down the 360° Button. Whilst keeping it held, select the desired DAW (or Plug-in Mixer) using the
soft keys at the top of the UF1.
STEP 1: Enter UF1 Layer
Mode by pressing & holding
the 360° key.
STEP 2: Select the
desired DAW layer via the
associated Soft Key.
To Next Page
Loading...
