Solid State Logic SSL UF1 User Manual

Pyramix Tutorial
115
SSL UF1 User Guide
Automation
You can select the automation mode of the whole mixer directly from UF1 by pressing the Shift Key, followed by desired automation
mode from the AUTOMATION mode from the Secondary Transport Key selection.
OFF, READ, WRITE, TRIM sets the Global Pyramix Automation modes.
V-Pot Assignment Modes
UF1 offers direct access to the Mackie Control V-Pot assignment modes implemented by Pyramix. These V-Pot assignment modes
are accessed via the keys labelled below: Mutliple presses of a V-Pot assigment mode button changes the function. E.g 1st PAN
press : L/R, 2nd PAN press : F/R, 3rd PAN press : B/T...
Note: when the label has a Slash "/", the secondary function is accessible via Quick Key 2 key (the MCU Cmd/
Alt modifier). This modifier allows you to perform 'secondary' Pyramix MCU functions - keep it held down whilst
pressing MCU commands that offer an alternative function.
.
STEP 2: Press to select the automation mode
STEP 1: Engage the SHIFT KEY to re-purpose the secondary transport keys to be automation keys.
The Pan Key is located on
the Soft Key above the Small
LCD.
Further V-Pot assignment modes are available via Soft Key Pages 1 and 2.

Solid State Logic SSL UF1 Specifications

General

Brand	Solid State Logic
Model	SSL UF1
Category	DJ Equipment
Language	English