TIP – You can add and remove Tags and Bases or even combine whole systems from nearby users
easily. Example: you are filming at a location for an hour and then your friend shows up with their own
SOLOSHOT2, sets up and films for a while. Eventually you want to join systems so at least one of the
Bases films both of you. Pair one of the Tags to the other. Each Base will continue to track the Tag it was
originally paired to but one of the Bases will track BOTH tags if you place it in Multi Mode. If you want
the other Bases to also track BOTH Tags, you must pair that Base into the system (no need to
recalibrate) and set it to Multi Mode. To pair that Base to the combined system, press and hold the “+”
Button on either Tag and then press the “+” Button of the Base. All 4 items will now share the same
system ID and both Bases can track both Tags when placed in Multi Mode. Keep reading for details.
35
MULTI SYSTEMS
To Next Page
Loading...
