SonicWall SonicWave <Version> Deployment Guide
Mounting Wireless Access Points
54
To attach the mounting bracket to the ceiling or to a wall using screws:
1 Place the top side of the mounting bracket against the ceiling or wall and mark the locations for the two
screw insertion points.
2 Drill starter holes at the marked locations. For a wood wall, use a drill bit that fits the screws. For drywall,
use a drill bit that fits the anchors.
3 For drywall, screw in the anchors.
4 Place the mounting bracket against the wall with the holes lined up on the marks or anchors.
5 Using the screws and a screwdriver, securely attach the mounting bracket to the ceiling or wall.
To Next Page
