Sony DHC-MD717 - Page 9

9
AM
FM75
2 Insert the antenna cord into the FM
antenna terminal.
3 Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
8
Adjust the operating voltage (for
DHC-MD717 only).
Before connecting the power cord, set
VOLTAGE SELECTOR on the tuner and
amplifier to the position of the local
power line voltage.
Cover
For DHC-MD717
AM
FM
75
Insert this
portion.
A
B
continued
4 Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
7
Connect the FM antenna.
The supplied FM lead antenna has the
following structure:
A : The antenna cord receives signals
along its entire length, so do not roll
up the cord.
B : Insert this portion into the antenna
terminal.
1 Remove the cover from portion B
(for DHC-MD717 only).
For DHC-EX880MD
For DHC-MD717
AM
FM
75
110-120V220-240V
VOLTAGE SELECTOR