HCD-SLK10D/SLK20D
2
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
• Keep the temperature of soldering iron around 270 °C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
‡0
anufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
‡³
DVD+RW,” “DVD-RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are
trademarks.
‡0
PEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
‡³0
emory Stick,” ,
³0HPRU
y Stick Duo,”
,
³0DJLF*DWH
0HPRU\
Stick,”
³0
emory Stick PRO,”
,
³0HPRU
y Stick
PRO Duo,” ,
³0HPRU
y Stick PRO-HG Duo,”
,
³0HPRU
y
St
LFN0LFU
o,” , ,
³0HPRU
y St
LFN520´
,
³0
agicGate,” and
are trademarks or
registered trademarks of Sony Corporation.
‡6
DHC Logo is a trademark of SD-3C, LLC.
‡:
indows
0HGL
a is either a registered
trademark or trademark of
0L
crosoft
Corporation in the United States and/or other
countries.
‡7
his product contains technology subject to
certain intellectual property rights of
0LFU
osoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate license(s)
fr
RP0LFURVRI
t.
‡7
HIS PRODUCT IS LICENSED UNDER
THE
03
EG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE
PERSONAL AND
121&200(
RCIAL
USE OF A CONS
80
ER FOR
(i) ENCODING VIDE
2,1&203/,$1&(
WITH THE
03
EG-4 VISUAL STANDARD
(“
03
EG-4 VIDEO”)
AND/OR
(ii) DECODING
03
EG-4 VIDEO THAT
WAS ENCODED BY
$&21680(5
ENGAGED IN A PERSONAL AND NON-
&200(
RCIAL ACTIVITY AND/OR WAS
OBTAINED FR
20
A VIDEO PROVIDER
LICENSED BY
03
EG LA TO PROVIDE
03
EG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
,0
PLIED FOR ANY OTHER USE.
ADDITIONAL INFO
50
ATION
INCLUDING THAT RELATING TO
3520
OTIONAL, INTERNAL AND
&200(
RCIAL USES AND LICE
NSING
0$<
BE OBTAINED
)520
03
EG LA,
LLC. SEE
http://www.mpegla.com/
‡$
ll other trademarks and registered
trademarks are of their respective holders. In
this manual,
70
and ® marks are not
specified.
This appliance is classified as a CLASS 1
LASER product. This marking is located on
the bottom exterior.
When the self-diagnosis function is
activated to prevent the system from
malfunctioning, a service number appears
on the screen. The service number
consists of an alphabet and numerals (e.g.
C 1350). See the following table for the
cause and corrective action.
Self-diagnosis function
First 3
characters of
the service
number
Cause and corrective
action
C 13 This disc is dirty.
‡
Clean the disc with a
soft cloth.
C 31 The disc is not inserted
correctly.
‡5
estart the system,
then re-insert the disc
correctly.