EasyManuals Logo

Sony HCD-SLK20D User Manual

Sony HCD-SLK20D
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
HCD-SLK10D/SLK20D
29
1-2-2. Clear the Emergency History
Press [DVD TOP MENU] button and then press [CLEAR] button
on the remote commander. The error code for all emergency his-
tory would be reset.
01. 00 00 00 00
Laser Hours CD 999h 59min
DVD 999h 59min
00 00 00 00
00 00 00 00 00 00 00 00
02. 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
[Next] Next Page [Prev] Prev Page
[O] Return to Top Menu
Emg. History Check
1-2-3. Clear the Initialize Setup Data
Press [DVD MENU] button and then press [CLEAR] button on the
remote commander.
Emg. History Check
initialize setup data...
Laser Hours CD 999h 59min
DVD 999h 59min
[Next] Next Page [Prev] Prev Page
[O] Return to Top Menu
1-2-4. Return to the Top Menu of Remocon Diagnosis
Menu
Press [0] button on the remote commander.
1-3. CHECK VERSION INFORMATION
To check the version information, please follow the following pro-
cedure.
1. From the Top Menu of Remocon Diagnosis Menu, select “4.
Version Information” by pressing the [4] button on the remote
commander. The following screen appears on the on-screen
display.
Version information
[0] Return to Top Menu
Firm (Main) : Ver. x.xxx
Firm (Sub) : xx.xx
RISC : xxxxxx
8032 : xxxxxx
Audio DSP : xx.xx.xx.xx
Servo DSP : xx.xx.xx.xx
To return to the Top Menu of Remocon Diagnosis Menu, press
[0] button on the remote commander.
FM TUNE LEVEL CHECK
unit
signal
generator
Procedure:
1. Turn the power on.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency: A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation : 75 kHz
Modulation : 1 kHz
ANT input : 35 dBP (EMF)
Note:
Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and tune A, B and C signals.
4. Con rm “TUNED” is lit on the display for A, B and C signals.
When the selected station signal is received in good condition,
“TUNED” is displayed.
SECTION 4
ELECTRICAL CHECK

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HCD-SLK20D and is the answer not in the manual?

Sony HCD-SLK20D Specifications

General IconGeneral
BrandSony
ModelHCD-SLK20D
CategoryReceiver
LanguageEnglish

Related product manuals