59
<HDR OPERATION>
P19
HDR MODE OFF
, LIVE HDR Displays the CCU setting.
SDR GAIN 0.0 to –15 dB, –6.0 dB
Enabled only when LIVE HDR is selected.
Gain setting applied to the SDR output.
HDR CONTRAST 100 to 566%, 200%
Enabled only when LIVE HDR is selected.
HDR output contrast ensured by setting SDR GAIN
(display only).
HDR BLACK OFFSET –30.0 to 30.0, 0.0
Enabled only when LIVE HDR is selected.
HDR output black offset
HDR KNEE OFF
, ON Enabled only when LIVE HDR is selected.
KNEE setting applied for HDR
POINT –99 to 99, 0
SLOPE –99 to 99, 0
HDR WHITE CLIP OFF, ON Enabled only when LIVE HDR is selected.
LEVEL –99 to 99, 0
HDR BLACK CLIP OFF, ON Enabled only when LIVE HDR is selected.
Sets whether to clip at 0% and lower in the HDR
output.
Set to OFF (fixed) when <OUTPUT FORMAT> t
FREQUENCY t OETF is set to S-Log3.
HDR BLACK
COMPRESSION
OFF
, ON Enabled only when LIVE HDR is selected.
Sets whether to compress low-luminance areas in
the HDR output.
<SCENE FILE>
P20
1 Stores and reads scene files (paint data):
When storing a file in camera memory, specify the
number before executing STORE.
When reading, only specify the number.
2
3
4
5
STORE Execute using ENTER.
01 01
to 32
STANDARD Execute using ENTER. Reads the standard paint data.
READ (USB t CAM) Execute using ENTER. Loads 32 scene files from a USB drive to internal
memory.
WRITE (CAM t USB) Execute using ENTER. Writes 32 scene files in the camera’s memory to a
USB drive.
FILE ID Max. 14 characters Enters a comment for the scene files to be written to
a USB drive.
See
“To specify a character string” (page 30)
.
CAM CODE Camera code Display only
DATE Date Display only
DISSOLVE OFF
, ON Switches scene files seamlessly.
SPEED 0.2 to 2.8 (0.2 steps), 3 to 10
(1 steps), 0.2
PAINT
Page name
Page No.
Item Settings Description
To Next Page
Loading...
