1-19
78
Recording an Entire DV/Digital8 Format Tape (ONE TOUCH DUB)
Recording an Entire DV/
Digital8 Format Tape (ONE
TOUCH DUB)
You can record the entire contents of a DV/Digital8 format tape
onto a disc with a single press of the ONE TOUCH DUB button.
The recorder controls the digital video camera for the whole
process, and completes the recording.
Example for all disc types
When using a DVD-RW (VR mode), chapter marks [b] are
marked where the recordings start on the tape [a] (Auto Scene
Chaptering).
For other discs, the recorder marks chapters either in 6 or 15
minute intervals depending on the setting in “Auto Chapter” in
Features Setup (page 97).
Follow steps 1 to 7 of “Preparing for recording
using the DV IN jack” (page 75), then press ONE
TOUCH DUB on the front panel of the recorder.
The recorder rewinds the tape and then starts recording the tape
contents.
When the recording is finished, the recorder rewinds the tape in
the digital video camera, and turns off.
To stop during recording
Press x REC STOP.
z Hints
• The date and time of the recording made with your digital video
camera is assigned as the program name in the DV/D8 Edit List
(page 84) (example: DV 10/25/03 10:00PM – 10/31/03 11:30PM).
• If you set “Finalize Disc” to “Auto” in Features Setup (page 98), the
recorded disc will automatically be finalized after recording is
finished.
Notes
• The recorder does not start One Touch Dub when you set “Add to Edit
List” to “On” (default) in Features Setup (page 98) and there are
already twenty programs on the recorder. In this case, the recorder
beeps and the front panel display lights up. Delete unnecessary
programs from the DV/D8 Edit List menu (page 84) and repeat the
steps above.
• When a blank space on the tape continues for more than five minutes,
One Touch Dub ends automatically.
• This function may not work with certain digital video cameras. In this
case, follow the instructions of “Recording From Equipment
Connected to the LINE IN Jacks” (page 88).
• In order for a One Touch Dub recording to be added to the DV/D8 Edit
List, “Add to Edit List” in Features Setup must be set to “On” (default)
(page 98).
• The recorder automatically records a blank for five minutes before it
stops dubbing. When you press
x
REC STOP, the recorder stops
recording, rewinds the tape, and turns off.
aa
bb
79
Program Edit
Connecting a Digital Video Camera or Other Equipment
Program Edit
You can select scenes from a DV/Digital8 format tape, and then
automatically record selected scenes to a disc of your choice.
Example for DVD-RWs (VR mode)
When using a DVD-RW (VR mode), chapter marks [b] are
marked where the recordings start on the tape [a] (Auto Scene
Chaptering). Chapter marks are also inserted at the IN points of
the selected scenes [c].
For other discs, the recorder marks chapters either in 6 or 15
minute intervals depending on the setting in “Auto Chapter” in
Features Setup (page 97).
To use this function, you will do the following:
m
Using the recorder’s remote control, you will fast forward or
rewind the tape to select the scenes. At this point, the selected
scenes are not copied to the disc. The recorder only remembers
the IN and OUT points of the scenes that you selected for
dubbing. You can also reset, erase, or change the order of the
scenes.
m
After you have selected the scenes, the recorder will fast forward
and rewind the tape automatically and record the scenes to a disc
of your choice.
a Follow steps 1 to 7 of “Preparing for recording
using the DV IN jack” (page 75), then press
SYSTEM MENU.
b Press M/m to select “DV/D8 EDIT,” then
press ENTER.
The DV/D8 Edit menu appears.
c Press M/m to select “Program Edit,” then
press ENTER.
The display asks whether to start selecting scenes.
◆ If you have previously saved a program
The display asks whether to edit an existing program
or to create a new program. To resume editing the
existing program, select “Saved Data.”
d Press
</,
to select “Start,” then press
ENTER.
The display for setting the IN point (start of the scene
on the tape) appears.
e Press
H
PLAY to start playback of the tape
in your digital video camera.
The scene starts to play in the background.
Connect your digital video camera and prepare for recording
Select and edit the scenes you want to dub
Dub the selected scenes to a disc
aa
bbb
cc
</M/m/,,
ENTER
RETURN
m/M
SYSTEM MENU
x REC STOP
H PLAY
DV/D8 EDIT
Select only the scenes you want to copy
from the DV/D8 tape.
Program Edit
Advanced Program Edit
DV/D8 Edit List
Scenes Selection
Do you want to select a scene?
Start Cancel
,
continued
80
Program Edit
f While watching the playback picture, search
for the IN point by pressing m or M, then
press ENTER.
The display for setting the OUT point (end of the
scene on the tape) appears. The scene starts to play in
the background from the IN point.
g While watching the playback picture, search
for the OUT point by pressing m or M,
then press ENTER.
The display asks whether to add the selected scene to
the Scene List menu.
To preview the scene, select “Preview.”
To reset either the IN or OUT point, select “Change
IN” or “Change OUT.” Repeat from step 5.
h Press
<
/M/m/
,
to select “OK,” then press
ENTER.
A new Scene List menu appears with the selected
scene.
i Press
<
/M/m/
,
to select “Add” and press
ENTER. Then repeat steps 5 to 9 to select all
the scenes you want to include.
You can add up to 50 scenes to a title.
To edit the Scene List, select a scene by pressing </
M/m/,, and then press ENTER. When the sub-
menu appears, select an edit option you want to apply
to the scene.
◆ To erase the scene
A Press M/m to select “Erase,” then press
ENTER.
B When the display asks for confirmation, press
</, to select “OK,” then press ENTER.
◆ To move the scene
A Press M/m to select “Move,” then press
ENTER.
The display for selecting the scene insertion point
appears.
B Press M/m to select the point, then press
ENTER.
The scene moves to the selected location.
◆ To reset the start or end of the scene
Press M/m to select “Change IN” or “Change OUT,”
then press ENTER.
◆ To preview the scene
Press M/m to select “Preview,” then press ENTER.
To cancel, press </M/m/, to select “Quit” in the
Scene List menu, then press ENTER.
j When you finish editing the Scene List, press
<
/M/m/
,
to select “OK,” then press
ENTER.
The display for entering a title name appears.
To enter a new name, select “Enter,” and follow the
explanations on page 34.
k To use the default name, press
<
/
,
to select
“OK,” then press ENTER.
The default title name is fixed, and the display asks
whether to start recording. If you want to change the
recording mode, press </, to move the cursor,
then press M/m to select the mode.
Select scene(Set IN point)
IN 0:00:30
OUT : :
–– – – –
Select scene(Set OUT point)
IN 0:00:30
OUT 0:00:52
Scenes Selection
Do you want to capture the scene
between IN 0:00:30 and OUT 0:00:52?
OK Cancel
Preview Change IN Change OUT
SCENE LIST
Total 0:00:22 Scenes 1
OK
Quit
Add
0:00:30-0:00:52
Duration 0:00:22
1
SCENE LIST
Total 1:23:30 Scenes 20
OK
Quit
Add
0:00:30-0:00:52
Duration 0:00:22
1
0:01:40-0:06:23
Duration 0:06:43
2
0:07:07-0:10:51
Duration 0:03:44
3
0:11:40-0:16:19
Duration 0:04:39
4
Title Name
Enter the title name.
OK Enter
DV10/11/02 1:30PM - 11/12/02 4:46PM
SP
DV/D8 Dubbing
Change the recording mode if necessary.
Select "Start" to start dubbing.
Start Cancel
81
Advanced Program Edit
Connecting a Digital Video Camera or Other Equipment
l Press
<
/
,
to select “Start,” then press
ENTER.
The recorder starts recording the tape contents as
programmed.
To quit recording, press x REC STOP.
m When the recording is finished, press
ENTER to select “Close.”
The display returns to the DV/D8 Edit menu.
n Press RETURN repeatedly to turn off the
display.
Notes
• The disc may not be recorded as programmed if the tape’s time code is
not sequential or there are blanks between the recordings on the tape.
In this case, follow the instructions of “Recording From Equipment
Connected to the LINE IN Jacks” (page 88).
• The start and end points of a program may be different from what you
have set if the source DV/Digital8 format tape is in any of the
following conditions:
– Recording mode was changed during the recording.
– There is a blank space in the recorded portion of the tape.
• If you set the beginning of the tape as the IN point and the end point as
the OUT point, the IN and OUT points may change slightly during
dubbing.
• You cannot set a scene shorter than one second.
• This function may not work with certain digital video cameras. In this
case, follow the instructions of “Recording From Equipment
Connected to the LINE IN Jacks” (page 88).
Advanced Program Edit
You can quickly edit a DV/Digital8 format tape by first copying
the entire contents of the tape to a DVD-RW (VR mode) and
then select the scenes you want from the disc. After you select
the scenes, you can change discs and record the scenes to another
disc of your choice. If necessary, you can also create a Playlist
title of the selected scenes in the DVD-RW (VR mode).
When dubbing to a DVD-RW (VR mode), chapter marks [b] are
marked where the recordings start on the tape [a] (Auto Scene
Chaptering). Chapter marks are also inserted at the IN points of
the selected scenes [c].
To use this function, you will do the following:
m
m
Taking advantage of the disc’s quick accessibility, you will
select the scenes you want from the recorded DVD-RW. You do
not have to fast forward or rewind the tape as explained in
“Program Edit” (page 79). You can also reset, erase, or change
the order of the scenes.
m
After you have selected the scenes, you can dub the selected
scenes to another disc of your choice. Or, you can create a
Playlist of the selected scenes.
Connect your digital video camera and prepare for recording
Record the entire contents of the DV/Digital8 tape to a
DVD-RW (VR mode)
Select and edit the scenes you want to dub
Dub the scenes to another disc
aa
bbb
cc
DVD-RW
(VR)
New disc
,
continued
To Next Page
Loading...
Need help?
General
