Connect the AC power cord to a wall outlet.
AC OUTLET*
AC power
cord
To a wall outlet
* Models of area code U, CA, SP only.
The configm.ation, shape, and nmnber of AC outlets
vary according to the model and the area code.
Notes
• The AC OUTLET(s) on the rear of the receive! is a
switched outlet, which supplies power to the
connected component only while tile receiver is
iumed on.
• Make sm-e tliat the total power consumption of the
component(s) connected to the receiver's AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this oudet. This may canse a
malfimction.
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by perlbrming the
following procedure.
This procednre can also be used to return
settings you have made to their factorv de_auhs.
1
2
Press I/_ to turn off the receiver.
Hold down I/(_ for 5 seconds.
"INITIAL" appears in the display. 63
The following are reset to their factorv
settings.
• All settings in the SP SETUP, LEVEL,
EQ, CUSTOMIZE and TUNER menus. _"
• The sound field memorized for each m
r,
input and preset station.
• Allpreset stations.
• All index names for inputs and preset
stations.
19 G8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
