Steps la through lc beginning on page 8 describe how to hook up your components to this receiver.
Before you begin, refer to "Connectable components" below lbr the pages which describe how to
connect each component.
After hooking up all yonr components, proceed to "2: Connecting the antennas" (page 15).
Connectable components
Component to be connected Page
DVD player
With digital audio output a) 8 9
With multi-cha i?_nelalldio output b/ 11 12
With analog alldio output only c/ 8 9
TV monitor
With component video input d/ 9 or 12
With S-Video or composite video input only 14
Satellite tune_
With digital audio output a) 8 9
With analog alldio output only c/ 8 9
CDiSuper Audio CD player
With multi-chaimel audio output b/ 11
With analog mldio output only c/ 13
MDiTape deck
With digital audio output a/ 10
With analog mldio output only c/ 13
Analog disc lurntable 13
Multi-channel decoder 11
VCR, video camera, video game, etc. 14
a/ Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc
b) Model with a MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the
component's internal nmlti-channel decoder through this receiver
c/ Model equipped only with AUDIO OUT LiR jacks, etc.
d/ Model with component video (Y, B-Y, R-Y) input jacks.
6 6B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
