Using the remote
1 STR-DA1000ES:
Move the easy scroll key to select "TUNER",
then press the key repeatedly to select FM
or AM.
STR-DB790:
Press TUNER repeatedly to select FM or
AM.
2 Press D.SKIP/CH/PRESET +/- repeatedly
to select the preset station you want.
To select the Preset station
directly
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
on the remote to change the memory page.
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio
Data System), which enables radio stations to
send additional information along with the
regular program signal. You can also display
RDS information.
Receiving RDS broadcasts
Simply select a station on the FM band
using direct tuning (page 25), automatic
tuning (page 25), or preset tuning
(page 26).
When you tune in a station that provides RDS
services, the RDS indicator lights up and the
program service name appears in the display.
Note
RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak
Displaying RDS information
While receiving an RDS station, press
DISPLAY.
Each time you press the button, RDS
information on the display changes cyclically as
Ibllows:
PS (Program Service name) or preset station
name a) ---* Frequency b) ---* PTY (Program
Type) indication c) ---* RT (Radio Text)
indication d)---* CT (Current Time) indication
(in 24-honr system) ---* Sound field currently
applied ---* Volume level
a) This information appears only when PS is received
or the preset station is indexed
b) This inlbrmation also appears for non-RDS FM
stations
c) Type of program being broadcast (see page 28).
d) Text messages seilt by the RDS station.
Notes
• If there is an emergency announcement by
government anthorities, "ALARM" flashes in the
display
>
3
_4
O
"O
continued_
27GB
To Next Page
Loading...
Need help?
General
Weight and Dimensions
