Sony TRINITRON KV-32V68 - DBS Connections; Connecting a DBS Receiver; DBS Receiver and VCR Connection

Connecting and Installing the TV (continued)
DBS Connections
Connecting a DBS (Direct Broadcast
Satellite) receiver
1 Connect the cable from your satellite antenna
to SATELLITE IN on your DBS receiver.
2 Connect your cable or antenna to VHF/UHF
on your TV.
3 Using A/V connectors, connect AUDIO and
VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your TV.
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1 Connect the cable from your satellite antenna
to SATELLITE IN on your DBS receiver.
2 Connect your cable or antenna to VHF/UHF
IN on your VCR.
3 Using a coaxial connector, connect VHF/UHF
OUT on your VCR to VHF/UHF on your TV.
4 Using A/V connectors, connect AUDIO and
VIDEO OUT on your DBS receiver to AUDIO
and VIDEO IN on your VCR.
5 Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
6
For optimum picture quality, use Cable/Antenna
S WDEO instead of the yellow A/V cable. | I _ I
S Video does not provide sound, your ._ | I _ I
laudi°c°nnect°rsmuststillbec°nne_ed" "1_!47t
1 DBSreceiver qll=_L_'_'_ I
A_O_O vitro svlc_o IN
Satellite "_ __o _:_
antenna _o_ v v _ _ -- j
cable ' ' '
VMC-810S/820S (not supplied)
For superior picture quality, use an All/cable
instead of the VHF/UHF connection.
1
Pressing TVIVIDEO on the I
remote control will allow you
to view from the DBS or VCR.
i
VMC-810S/820S (not supplied)
(Rear of TV)
)-R (red)
(white)
(yellow)
TV)
-- S._JNK 12.LK_K _ S.LINK ,
-- AUDIO-R (red)
-- AUDIO-L(white)
-- VIDEO (yellow)