Watching the TV
The following chart will explain the function
of the buttons found on your remote control.
REFER TO THE ILLUSTRA TION
OF THE REMOTE CONTROL ON
THE INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEWTHISCHART
Press when you want to turn connected equipment on and off.
You can program your remote control to operate other video equipment. (see
"Operating Video Equipment" on page 34)
-_- _u_o, -- Presswhen you want to control connectedequipment withyour remote
(_) _) (_) control.(see pages 34-36 for instructionson programmingyour remote control)
- (_ Use for direct channel selection. Press 0-9 to select a channel, the channel will
and ENTER'_" change after 2 seconds, or you can press ENTER for immediate selection.
CH Press to scan through the channels.
(_ * Keeping the CH + or,- pressed allows you to rapidly scan to the desired channel.
pAc_
Press to alternate or jump back and forth between two channels. You can jump
JuuP between the last two channels selected with the 0-9 keys.
This button can also be used to activate on-screen options while using the
GUIDE Plus+ feature.
.u_ Press to mute the sound (MUTING will appear on the screen). Press again or
O press VOL + to restore sound.
Press repeatedly untilthe TV displays the approximate time in minutes (30, 60, or
SLEEP
90) that you want the TV to remain on before turningoff automatically. Cancel by
pressinguntilSLEEP OFF appears,
23
To Next Page
