• Basic Set Up
Inserting batteries
Insert two size AA (R6) batteries (supplied) by
matching the + and - on the batteries to the
diagram inside the battery compartment.
Notes
• Remove the batteries to avoid damage from
possible battery leakage whenever you
anticipate that the remote controJ will not be
used for an extended period.
• Handle the remote control with care. Avoid
dropping it, getting it wet, or placing it in direct
sunlight, near a heater, or where the humidity is
high.
• Your remote control can be programmed to
operate most video equipment. (see page 34)
Using the remote control
move & select buttons
.VOL CH
g8
ove
Select
The supplied remote control has "arrow"
buttons (t, _,, (,, ,_) which allow for movement
of the on-screen selector. Pressing on the outer
buttons will cause the selector to move in the
corresponding direction. Pressing the center
button (C_)) will select the item.
Adjustment bars
When menu items present an adjustment bar
( _,mm---,,or ,,,,,_-,,,,), use the arrow buttons to
change the setting.
On-screen helplinstructions
Several menu windows will provide prompts
and instructions to assist you in navigating
through the different functions.
When presented, use these to supplement the
instructions in this manual.
11
To Next Page
