Connecting and Installing the TV
Making Connections
Refer to the table below, it will direct you to the diagram suitable to the components you will be
connecting.
Cable or antenna only 3
Cable and antenna 3
Cable box 4
Cable box and cable to view scrambled channels 4
VCR and cable or antenna 5
VCR and cable box 5
Direct Broadcast Satellite Receiver (DBS) 6
VCR and Direct Broadcast Satellite Receiver (DBS) 6
Digital Versatile Disc player (DVD) 7
Audio system 7
A/V receiver 8
Two VCR's for editing 8
Camcorder to view tapes 9
IR Blaster Cable* (G-Link) 9
S-Link connections 10
* IMPORTANT
• You must connect the IR Blaster in
order to operate your VCR and/or
cable box with the GUIDE Plus+
feature.
Note
• When using the IR Blaster and a cable box, the
cable box must always be left ON to allow
GUIDE Plus+ to receive information about
upcoming television programs.
To Next Page
Loading...
