Using the AUDIO menu
TREBLE Iflmll_,==u
BASS IllllA ==="=
BALANCE =lmNm,u=
AUTO VOLUME: OFF
EFFECT: OFF
MTS: STEREO
SPEAKER: ON
AUDIO OUT VARIABLE
_MENU
Move_]_ Select_] Exit_l
Adjustment
bars
For detailed information on using the remote
control to modify menu settings, refer to
"Learning menu selection" on page 26.
To select the AUDIO J menu:
Display =i_ Highlight _ m=_ Select
MENU (_
C_
To restore the factory AUDIO
settings
Press RESET while the AUDIO menu is
displayed.
TREBLE Adjust left or right to decrease or increase higher pitched sound.
BASS Adjust left or rightto decrease or increase low pitched sounds.
BALANCE Adjust left or rightto emphasize right and left speaker volume.
AUTO VOLUME ON" Select to stabilizethe volume.
Stabilizesvolume OFF: Select to turn AUTO VOLUME off.
Press (_ for direct selection of AUTO VOLUME settings.
EFFECT Press • or ,_ to select one of these customized effects:
Enhanced,_udle SIMULATED: Adds a stereo-like effect to menD programs.
options SRS: Produces a dynamic three dimensional sound for stereo audio signals.
MTS
Enjoystereo,
bilingual and menD
programs
SPEAKER
Custom selection of
audio output source
AUDIO OUT
Useto controlthe
TV'svolumethrough
a stereo
MTS: Press • or ,_ to select one of the following options:
STEREO: Select when viewing a broadcast in stereo.
SAP: Select to listen to bilingual broadcast. (Non-SAP programs will be muted
when this feature is selected)
MONO: Select to reduce noise during stereo broadcasts for areas of weak
reception.
Quick Mrs access: Press MTS on your remote control to cycle through
the MTS options.
ON: Select to listento the sound from the TV speakers with or without a
separate stereo system.
OFF: Select to turnoff the "IV speakers and listen to the TV's sound onlythrough
external audio system speakers.
AUDIO OUT can onlybe set when SPEAKER is set to OFF.
VARIABLE: Sound output varies according to the TV settings.
Useful when you want to use your TV's remote control to adjust the output of a
separate audio system.
FIXED: Sound output is held at a fixed level through your stereo.
Use your A/V receiver's remote control toadjust the volume.
29
To Next Page
Loading...
