Tips "_°
• In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment's own remote control.
• When you remove the batteries, the code number may
revert to thefactory setting.
• The code numbers for Sony VCR's are assigned at the
factory as follows:
VHS VCR
8 mm VCR
301
(preset code for the
supplied remote control)
302
Beta, ED Beta VCRs 303
MDP (Multi Disc Player)
code numbers
Manufacturer Code
Sony 701
Panasonic 704, 710
Pioneer 702
Operating an MDP Buttons on the remote
control
To turn on or off Press V'I'R/DVD (POWER).
To play Press I_-.
To stop Press II.
To pause Press II.
To resume normal playback,
press again or press I_-.
To scan Press _ or <1<1during
playback.
To resume normal playback,
press I_ _.
To search the chapter Press CH +/-.
forward or backward
Tip _"
If you will not be programming a DBS or cable box into
the DBS/CABLE input, you can use it to program other
video equipment (e.g. DVD, MDP, or second VCR).
(see page 36)
DVD (Digital Versatile Disc)
code numbers
Manufacturer Code
Sony 751
Panasonic 753
Pioneer 752
RCA 755
Toshiba 754
Operating a DVD
player
To turn on or off
To play
To stop
To pause
Buttons on the remote
control
PressVTR/DVD (POWER).
Press II_.
Press I1.
PressI I.
To resume normal playback,
press again or press I_ _.
To scan Press _ or <1<1during
playback.
To resume normal playback,
press I=_.
To search the Press CH +/-.
chapter forward or
backward
To select chapters 0-9 + ENTER.
directly
MENU Press to display DVD menu.
To move cursor in Use your arrow buttons
menu '_, _.,_.,,_.
35
To Next Page
