3 Advanced use
14 SOREDEX 208396 rev 2
3.3 Workflow
From the imaging application software you are using select
unit Setup / Workflow page.
3.3.1 Readout start
Select Automatic if you want the unit to start automatically
image plate processing.
The Start after options allow to select when the unit starts
image plate processing:
• After Plate insert: processing starts automatically
when it detects right way inserted imaging plate in
the plate carrier.
• After Cover removal: after the imaging plate and
protective cover have been inserted into the plate
carrier,
processing starts automatically when the protec-
tive cover is removed.
To Next Page
Loading...
